Housing w/mounting nuts:      Molded ABS plastic Epoxy encapsulation Cable:     2 meters; 3 wire - standard Attention OEMs:     We will be happy to quote on EA18s with modified output characteristics - either response slopes or voltage ranges.
Mechanical Specifications	Wiring Diagram Output Characteristics

Electrical Specifications
Input Voltage	Supply Ripple	Operating Current nominal		Output Current nominal	Compliance Voltage
10-30 VDC	10%	5 mA		4 - 20 mA	6 VDC
Range factory set	Linearity within specified range	Circuit Protection	Temperature Range	Relative Humidity	Environment
. 25" - . 55" 6. 4 - 14 mm	+/- 5%	reverse polarity and current limiting	+ 50o F to + 110o F + 10o C to + 43o C	0 - 95%	unaffected by normal factory conditions of dirt, grease and vibration

Installation/Setup Procedures
Mechanical Installation		Electrical Installation
Use the nuts supplied with the sensor to mount it to a bracket with M18 x 1 threads or a through-hole for 18mm.      Multiple units must be spaced at least 18mm apart, laterally, and the sensing face of each unit must extend at least 18mm beyond any metal mounting bracket.		Your sensor's electrical connections must agree with those shown in the wiring diagram above.
Setup Procedure
These units are factory-set to provide uniformity of response - output adjustment is a function of sensor positioning.

	phone: +1 800. 315. 9233	email: sales@gordonproducts.com	fax: +1 203. 775. 1162
	© copyright 2008 Gordon Products Incorporated