Housing:      brass, bright nickel-plated;   patented, heat-treated, beryllium-copper outer conductor spring;   heat-treated, beryllium-copper center socket (gold plated) All dielectrics are machined TeflonTM Ratings:     MIL-C-49142, 48-hour salt spray requirement Cable for Mating Connector:     Trompeter Electronics® TRC-50-1 Cable Sheath:     PVC (yellow) Bend Radius (minimum):     .75" (19.1 mm) This data is from the Trompeter Electronics® T18A Catalog
Mechanical Specifications	Wiring Diagram

Electrical Specifications for TRC-50-1 Triaxial Cable
Impedance Ohms		Operating Voltage maximum VDC	Operating Voltage maximum VAC	Capacitance pF/ft. maximum	Shield Coverage
50 +/- 2		2.0 KV	1.0 KV	29. 5	93%

Installation/Setup Procedures
Mechanical Installation		Electrical Installation
Use the mounting nut and lock washer to mount the bulkhead connector to the grounded shield of your remote sensor.      The hole specifications and mounting bracket thickness are indicated above.		Connect the center conductor to the sensing element, the inner shield to the driven shield element and the ground lug to the grounded shield element. Please, refer to the wiring diagram above.

	phone: +1 800. 315. 9233	email: sales@gordonproducts.com	fax: +1 203. 775. 1162
	© copyright 2008 Gordon Products Incorporated