 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Mechanical Specifications |
| Mechanical Specifications for 12A272 Mounting Clamp | |||||
| Tube O.D. | Housing Material | Inserts | Mounting Bolts for ASE type |
Bolt Length | |
| 1" 25.4 mm |
polypropylene | E Type | ¼ - 20 UNC hex head |
as required
1.5" (38.1 mm) minimum |
|
| Installation/Setup Procedures | ||
| Mechanical Installation | Electrical Installation | |
|
Use ¼ - 20 UNC, Hex head bolts to secure the mounting clamp
to a bracket or bulkhead.
The hole specifications are listed above, and the length of the bolts required will depend on the thickness of the mounting bracket. |
When you position the switch in the mounting bracket, you must ensure that the sensor face is at least the sensor diameter away from non-target objects - especially, grounded metals. | |
 |
phone: +1 800. 315. 9233 |
email: sales@gordonproducts.com |
fax: +1 203. 775. 1162 |
 |
| © copyright 2008 Gordon Products Incorporated | ||||
